Hi Bdale/Altus mailing list folks,
I'm planning to do a two stage test on the weekend with an EasyTimer
handling the sustainer ignition with tilt inhibit enabled. My test logic
(at least how I understand it) is as follows.
Height Above Pad greater than 300m
Angle from vertical less than 20 degrees
Don't light until 5 seconds after launch
Do not fire after 6 seconds have elapsed in the flight.
Does this make sense to y'all? I'm going to be flying with an ematch in the
sustainer, not a motor, as this is a test. Hence me not being worried about
my relatively low Height Above Pad value.
Here's the config I've applied.
[image: image.png]
Any advice would be appreciated.
Kind regards,
drew
just installed the new version on a brand new Macbook with the M1 chip. It appears to run and download data, but I have no way (or don’t know how) to say where it will be stored. The program made an Altus Metrum folder in my user account, not even in the Documents folder, which is not where I want the stuff to go. After I moved that folder and when I try to export or open and look at data I can’t navigate to where I put the files. Thoughts or suggestions?
I haven’t tried monitoring a flight yet, but is there a separate TeleGPS app? If there is, I can’t find it. I copied the one I had from the old computer and running it, the program says “No AltOS library in “/Applications/TeleGPS.app/Contents/Resources/Java”.” But then it starts but doesn’t look to do anything. On the hardware side, will I need to update the TeleGPS transmitters? It says it is running version 1.9.7.
thanks,
Charlie
