altusmetrum November 2020

altusmetrum@lists.gag.com

8 participants
4 discussions

Procedure needed to flash Altus Metrum TeleMini Firmware Update

by Andrew Grippo

I have been poking around the manual and forums for a few hours and I am not able to find the correct steps to take to flash a TeleMini Ver 3. Can anybody help? I tried using a Teledongle 3.0 to connect to the altimeter but I'm not seeing it displayed when I bring up the flash Image screen. Thanks, Andrew Grippo

2 years, 4 months

Re: [altusmetrum] Getting Sensor Error after turning on a new TeleMega v4.0

by Justin Stotter

Brett, I had this same issue recently with my new Mega using AltosUI. On the FB group Chris suggested I calibrate and then change to antenna down via putty and that worked for me.

2 years, 4 months

Getting Sensor Error after turning on a new TeleMega v4.0

by Brett Bachman

Hi! Need your help. I just finished building a new AV Bay which includes a newly purchased TeleMega v4.0, #6622, with the firmware that came with it: 1.9.1e. When I power it up vertical, I get the Sensor error beep code, X, dah dit dit dah, after the battery voltage, and then the altimeter goes into idle mode. Is this a hardware issue that needs to be fixed? Or is there something I can do to safely fly with this device? Please advise, Thanks, Brett *Brett Bachman*TRA #17766 L3 ARSABQ, AARG ND5P *+1.512.436.0260*

2 years, 4 months

New altusmetrum telemetrum

by Charlie Peckham

I'm an older guy who loves rocketry but struggles with the tech side of the hobby. Is there someone out there who I could get together with to get me using one of these? I would love to help someone with a little cash if they could help me. I live in Southern Oregon. Thanks, Sent from Yahoo Mail on Android

2 years, 4 months

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

altusmetrum November 2020